The Northern Lights Commercial Series: .
40-175 kW @ 60 Hz / 1800 rpm

 

Download Product Brochure

Product Installation Drawing

Accessories & Options

Request Pricing

Locate a Dealer

Other Marine Generators

 

 


For over 50 years, Northern Lights
generators have been working for people who
work on the water. From Bering Sea crabbers
to bayou mud boats, push boats to high
speed ferries; Northern Lights has powered
them all. The end result of this experience is
the new C2 Series powered by US EPA Tier
II compliant, Lugger diesels. C2 sets
combine high tech emission controls
with the cast-iron reliability, simplicity,
durability and product support you
expect from a Northern Lights—all at a very
affordable price.

Underloaded and overloaded generators
cause problems and waste money. With seven
models, 20 to 175 kW, there is a Northern
Lights commercial set that is right for your job
(the Northern Lights full range is from 5 to 520
kW). Mix and match these compatible sets for
your best, single source, power solution.


Built for continuous duty, many Lugger
powered sets have logged over 30,000 hours
without a rebuild. Check the features and
you will see why. Replaceable wet cylinder
liners, liquid cooled turbos, cast-iron exhaust
manifolds, plate oil coolers, cupronickel heat
exchangers, gear driven seawater pumps.
Rugged components built from the fi nest
materials.


Hoses, gaskets and belts have been
minimized. Control panels keep you in touch
with your set’s performance while safety
shutdowns protect it. DC relays are used
instead of printed circuit boards. Special
500 hour oil changes and one side service
simplify maintenance.

 

 


“ESP” is a window to your set’s real time
operating condition. The engine control unit
that controls the electronic fuel injection on M65C2, M99C2 and M175C2 produces a
stream of engine performance and diagnostic
information that can be shown on an optional
monitor.

.
The sea is no place for a stand-by generator.
All Northern Lights have low 95°/50°
temperature rise ratings, Class H epoxy
insulation and ±1.5% voltage regulation

.
Each option is designed to integrate into
a total power system custom built for your
vessel. Consider a high power PTO that can
supply up to 149 HP of hydraulic power at a
touch of a button.


Complete load testing is done with all
accessories installed. Testing is just one of the
quality controls that supports your decision to
choose the very best commercial generator
set for your workboat.


Northern Lights’ quality reputation is a big
plus when you sell your vessel. Buyers will
know you cared enough to install the very best
equipment.


The C-2 Commercial Series: Premium commercial generator sets, at an affordable cost. Don’t risk your livelihood to anything less.

 

 
 
M40C2
Specifications
60Hz/1800rpm 40 kW
Cylinders: 4 inline
Bore: 4.19 in (106 mm)
Stroke: 5.0 in (127 mm)
Displacement: 276 cid (4.5 ltr)
Fuel System: Mechanical
Aspiration: Natural
Length: 64.0 in (1631 mm)
Width: 27.5 in (699 mm)
Height: 36.0 in (914 mm)
Weight: 1545 lbs (701 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
M55C2
Specifications
60Hz/1800rpm 55 kW
Cylinders: 4 inline
Bore: 4.19 in (106 mm)
Stroke: 5.0 in (127 mm)
Displacement: 276 cid (4.5 ltr)
Fuel System: Mechanical
Aspiration: Turbocharged
Length: 67.8 in (1722 mm)
Width: 31.0 in (787 mm)
Height: 40.16 in (1020 mm)
Weight: 1920 lbs (872 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
M65C2
Specifications
60Hz/1800rpm 65 kW
Cylinders: 4 inline
Bore: 4.19 in (106 mm)
Stroke: 5.0 in (127 mm)
Displacement: 276 cid (4.5 ltr)
Fuel System: Electrical DE 10
Aspiration: Turbocharged
Length: 70.9 in (1801 mm)
Width: 27.5 in (699 mm)
Height: 38.6 in (981mm)
Weight: 1941 lbs (882 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
M99C2
Specifications
60Hz/1800rpm 99 kW
Cylinders: 4 inline
Bore: 4.19 in (106 mm)
Stroke: 5.0 in (127 mm)
Displacement: 414 cid (6.8 ltr)
Fuel System: Electronic DE10
Aspiration: Turbocharged
Length: 85.0 in (2159 mm)
Width: 27.5 in (699 mm)
Height: 40.0 in (1016 mm)
Weight: 2805 lbs (1274 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
M175C2
Specifications
60Hz/1800rpm 175 kW
Cylinders: 6 inline
Bore: 4.6 in (116 mm)
Stroke: 5.1 in (129 mm)
Displacement: 496 cid (8.1 ltr)
Fuel System: HPCR
Aspiration: Turbo&Aftercooled
Length: 84.0 in (2133 mm)
Width: 31.0 in (787 mm)
Height: 43.5 in (1106 mm)
Weight: 3590 lbs (1629 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
           
 
home | Marine Generator Sets | C-Series | More C-Series
Northern Lights Marine GeneratorsLugger Propulsion Engines Technicold Marine Systems Clean-Sep Filtration System
 

| News | Events | Affiliations | About us | Contact Branches | Site Map |

©2010 Northern Lights, Inc.