The Northern Lights Commercial Series: .
20-250 kW @ 60 Hz / 1800 rpm

 

 

Product Installation Drawing

Accessories & Options

Request Pricing

Locate a Dealer

Other Marine Generators

 

 

The heritage continues.
For over 40 years, Northern Lights generators have been working for people who work on the water. From Bering Sea crabbers to bayou mud boats, push boats to high speed ferries; Northern Lights powers them all. The end result of this experience is the C3 Series powered by US EPA Tier III compliant, Lugger diesels. C3 sets combine high tech emission controls with the cast-iron reliability, simplicity, durability and product support you expect from a Northern Lights—all at a very affordable price

.
Selection without compromise.
Underloaded and overloaded generators cause problems and waste money. With seven models, 20 to 250 kW, there is a Northern Lights commercial set that is right for your job. Mix and match these compatible sets for your best, single source, power solution.
20-550 kW 60 Hz / 1800 RPM


Tough Lugger diesels.
Built for continuous duty, many Lugger powered sets have logged over 30,000 hours without a rebuild. Check the features and you will see why. Replaceable wet cylinder liners, liquid cooled turbos, cast-iron exhaust manifolds, plate oil coolers, cupronickel heat exchangers, gear driven seawater pumps. Rugged components built from the finest materials.


Simple to operate and maintain.
Hoses, gaskets and belts have been minimized. Control panels keep you in touch with your set’s performance while safety shutdowns protect it. DC relays are used instead of printed circuit boards. Most service points are on a single side to simplify maintenance.

 

 

Electronic system profiler.
“ESP” is a window to your set’s real time operating condition. The engine control unit that controls the electronic fuel injection on M65C3, M99C3 and M150C13 produces a stream of engine performance and diagnostic information that can be shown on an optional monitor.


Superior generator ends
.
The sea is no place for a stand-by generator. All Northern Lights have low 95°/50° temperature rise ratings, Class H epoxy insulation and ±1.5% voltage regulation.

Complete options list.
Each option is designed to integrate into a total power system custom built for your vessel. Consider a high power PTO that can supply up to 149 HP of hydraulic power at a touch of a button.


Total unit load testing.
Complete load testing is done with all accessories installed. Testing is just one of the quality controls that supports your decision to choose the very best commercial generator set for your workboat.


High resale value.
Northern Lights’ quality reputation is a big plus when you sell your vessel. Buyers will know you cared enough to install the very best equipment.


The C-3 Commercial Series.
Premium commercial generator sets, at an affordable cost. Don’t risk your livelihood to anything less.

 
 

 

M20CRW3
Specifications
60Hz/1800rpm 20 kW
Cylinders: 4 inline
Bore: 3.3 in (84 mm)
Stroke: 3.9 in (100 mm)
Displacement: 135 cid (2.2 ltr)
Fuel System: Mechanical
Aspiration: Natural
Length: 43.2 in (1098 mm)
Width: 20.7 in (526 mm)
Height: 32.8 in (833 mm)
Weight: 820 lbs (372 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
M40C3
Specifications
60Hz/1800rpm 40 kW
Cylinders: 4 inline
Bore: 3.7 in (94 mm)
Stroke: 4.7 in (120 mm)
Displacement: 202 cid (3.3 ltr)
Fuel System: Mechanical
Aspiration: Natural
Length: 59.7 in (1517 mm)
Width: 26.2 in (666 mm)
Height: 34.2 in (870 mm)
Weight: 1332 lbs (604 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
M65C3
Specifications
60Hz/1800rpm 65 kW
Cylinders: 4 inline
Bore: 4.19 in (106 mm)
Stroke: 5 in (127 mm)
Displacement: 276 cid (4.51 ltr)
Fuel System: HPCR
Aspiration: Turbo
Length: 64.9 in (1648 mm)
Width: 28.0 in (711 mm)
Height: 39.8 in (1011 mm)
Weight: 2072 lbs (940 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
 
M99C13
Specifications
60Hz/1800rpm 99 kW
Cylinders: 4 inline
Bore: 4.19 in (106 mm)
Stroke: 5 in (127 mm)
Displacement: 276 cid (4.51 ltr)
Fuel System: HPCR
Aspiration: Turbo & Aftercooled
Length: 68.8 in (1747 mm)
Width: 31.0 in (787 mm)
Height: 43.0 in (1092 mm)
Weight: 2565 lbs (1164 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
M150C13
Specifications
60Hz/1800rpm 150 kW
Cylinders: 6 inline
Bore: 4.19 in (106 mm)
Stroke: 5 in (127 mm)
Displacement: 414 cid (6.8 ltr)
Fuel System: HPCR
Aspiration: Turbo&Aftercooled
Length: 83.1 in (2111 mm)
Width: 33.8 in (858 mm)
Height: 41.6 in (1056 mm)
Weight: 3550 lbs (1612 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
 
M200C13
Specifications
60Hz/1800rpm 200 kW
Cylinders: 6 inline
Bore: 4.6 in (118 mm)
Stroke: 5 in (127 mm)
Displacement: 202 cid (3.3 ltr)
Fuel System: HPCR
Aspiration: Turbo & Aftercooled
Length: 97.5 in (2745 mm)
Width: 37.3 in (947 mm)
Height: 45.5 in (1156 mm)
Weight: 4263 lbs (1935 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
M250C13
Specifications
60Hz/1800rpm 250 kW
Cylinders: 6 inline
Bore: 4.6 in (118 mm)
Stroke: 5 in (127 mm)
Displacement: 414 cid (6.8 ltr)
Fuel System: HPCR
Aspiration: Turbo & Aftercooled
Length: 102.5 in (2604 mm)
Width: 36.0 in (914 mm)
Height: 44.8 in (1138 mm)
Weight: 4640 lbs (2104 kg)
NOTE:
Information, specifications, materials and dimensions subject to change without notice.
 
           
 
home | Marine Generator Sets | C-Series
Northern Lights Marine GeneratorsLugger Propulsion Engines Technicold Marine Systems Clean-Sep Filtration System
 

| News | Training | Events | Affiliations | About us | Contact Branches | Site Map |

©2014 Northern Lights, Inc.