Opens in a new tab
RA Series · Model 1 of 7
Technicold by Northern Lights

Technicold RA08 Air Handler

8,000 BTU
@ 60 Hz
297 CFM
Airflow @ 60 Hz
230V
Voltage
23.5 lbs
10.65 kg
Request a QuoteContact Us
Technicold RA08 Air Handler

Specifications

RA08 Technical Data
RA08 technical specifications
BTU @ 60Hz8,000 BTU
BTU @ 50Hz6,600 BTU
Airflow297 CFM
Amp Draw (115V)--
Amp Draw (230V)0.89A
Voltage230V
Heat Strip0.75 kW (3A)
RA08 Dimensions & Weight
RA08 dimensions and weight
Height9.6" (244 mm)
Width17.8" (453 mm)
Depth14.4" (365 mm)
Weight23.5 lbs (10.65 kg)
Information and dimensions are subject to change without notice.

Features & Benefits

RA08 Model Features
The Technicold Philosophy

SimplyEngineered

For your vessel

Every Technicold system starts from the same conviction: the best marine equipment is the simplest machine that does the job completely. Fewer parts to fail. Straightforward service at sea. Proven components chosen for the marine environment. It is the principle that guides every engineering decision we make.

316L Stainless Construction

Durability in harsh marine environments

The shroud and pan are constructed from 16 gauge 316L stainless steel, with stainless fasteners and hardware, built for demanding marine environments. The stainless is dressed with a swirl finish, with a mirror finish also available.

Slip-Ring Mounted Blowers

Tool-free blower rotation

Draw-through blowers are slip-ring mounted so the discharge can be rotated by hand before or after installation to align with the ductwork, without disassembling the air handler or using power tools.

Insulated Blower Design

Quiet operation at full airflow

The blowers are insulated and designed to reduce motor, air-velocity, and vane-tip noise while delivering rated-capacity airflow. The unit's heavy metal mass resists vibration, so separate vibration isolation mounts are not required.

Deep Condensate Pans

Condensate control in rough seas

Two inch deep insulated stainless steel pans prevent condensate from sloshing or spilling in rough seas. Dual drain connections are welded at the bottom of each pan for complete drainage, eliminating standing water and algae buildup.

Fully Rated Fan Coils

Full capacity in all conditions

Fan coils are rated at or above their specified capacity, allowing the air handler to deliver maximum cooling or heating across ambient conditions.

Additional Features & Benefits

The water valve motor is positioned away from the air handler's water piping, helping keep dripping condensate off the motor and reducing the risk of corrosion or motor failure.

A bleeder hose and valve come standard, making it easy to purge air from the chilled water loop at commissioning and after service.

Optional electric heat strips add heating capability, and an ozone-free UVC bulb can be installed inside the air handler, treating mold and other contaminants in the airflow and at the fan coil rather than only in the ducting.

The horizontal RA configuration keeps the air handler's height profile low, making it better suited to shallow installation spaces where vertical clearance and room for ducting are limited.

The RA24 and RA32 use two blowers instead of one large one, keeping the same low profile at higher capacities and giving each blower its own duct path, so larger spaces can be served without a taller unit or added parts.

Technicold RA08 Air Handler

Documents

3 DOCUMENTS · 3 TYPES

Spec Sheets · 1 File

Chilled Water Air Handlers Specification Sheet
B151

Drawings · 1 File

RA08VHB Air Handler 8000 BTU Drawing R3
M90105.3

Literature · 1 File

Chilled Water Competitive Advantage Overview
L770
RA Series · Model 1 of 7

Model Lineup

Talk to Us

Get a Quote or Ask a Question

Tell us about your vessel or project. Request a quote for pricing on the equipment you have in mind, or contact us with any question about sizing, installation, or service.
Request a QuoteContact UsFind a Dealer