Opens in a new tab
RAVC Series · Model 2 of 3
Technicold by Northern Lights

Technicold RAVC16 Vertical Compact Air Handler

16,000 BTU
@ 60 Hz
450 CFM
Airflow @ 60 Hz
230V
Voltage
38.2 lbs
17.3 kg
Request a QuoteContact Us
RAVC16 product photo
Technicold RAVC16 Vertical Compact Air Handler

Specifications

RAVC16 Technical Data
RAVC16 technical specifications
BTU @ 60Hz16,000 BTU
BTU @ 50Hz13,200 BTU
Airflow450 CFM
Amp Draw (115V)Contact Us
Amp Draw (230V)0.78A
Voltage230V
Heat StripContact Us
RAVC16 Dimensions & Weight
RAVC16 dimensions and weight
Height25.8" (655 mm)
Width20.5" (520 mm)
Depth8.6" (218 mm)
Weight38.2 lbs (17.3 kg)
Information and dimensions are subject to change without notice.

Features & Benefits

RAVC16 Model Features
The Technicold Philosophy

SimplyEngineered

For your vessel

Every Technicold system starts from the same conviction: the best marine equipment is the simplest machine that does the job completely. Fewer parts to fail. Straightforward service at sea. Proven components chosen for the marine environment. It is the principle that guides every engineering decision we make.

316L Stainless Construction

Durability in harsh marine environments

The shroud and pan are constructed from 16 gauge 316L stainless steel, with stainless fasteners and hardware, built for demanding marine environments. The stainless is dressed with a swirl finish, with a mirror finish also available.

Slip-Ring Mounted Blowers

Tool-free blower rotation

Draw-through blowers are slip-ring mounted so the discharge can be rotated by hand before or after installation to align with the ductwork, without disassembling the air handler or using power tools.

Insulated Blower Design

Quiet operation at full airflow

The blowers are insulated and designed to reduce motor, air-velocity, and vane-tip noise while delivering rated-capacity airflow. The unit's heavy metal mass resists vibration, so separate vibration isolation mounts are not required.

Deep Condensate Pans

Condensate control in rough seas

Two inch deep insulated stainless steel pans prevent condensate from sloshing or spilling in rough seas. Dual drain connections are welded at the bottom of each pan for complete drainage, eliminating standing water and algae buildup.

Fully Rated Fan Coils

Full capacity in all conditions

Fan coils are rated at or above their specified capacity, allowing the air handler to deliver maximum cooling or heating across ambient conditions.

Additional Features & Benefits

The water valve motor is positioned away from the air handler's water piping, helping keep dripping condensate off the motor and reducing the risk of corrosion or motor failure.

A bleeder hose and valve come standard, making it easy to purge air from the chilled water loop at commissioning and after service.

Optional electric heat strips add heating capability, and an ozone-free UVC bulb can be installed inside the air handler, treating mold and other contaminants in the airflow and at the fan coil rather than only in the ducting.

The vertical configuration concentrates the air handler into a minimal footprint, making the RAVC series well suited to tight installations where available floor or cabinet space is limited.

The RAVC plenum is fully insulated and constructed from stainless steel, extending the unit's durable, insulated construction through the air-delivery section.

Custom water valve locations are available, giving installers more flexibility to fit the air handler to the vessel's plumbing layout.

Technicold RAVC16 Vertical Compact Air Handler

Documents

2 DOCUMENTS · 2 TYPES

Spec Sheets · 1 File

Vertical Compact Air Handlers Specification Sheet
B138

Literature · 1 File

Chilled Water Competitive Advantage Overview
L770
RAVC Series · Model 2 of 3

Model Lineup

The RAVC16 sits between the RAVC12 and the RAVC18 in this lineup of 3 models. Browse the full Vertical Compact Air Handlers range.

Talk to Us

Get a Quote or Ask a Question

Tell us about your vessel or project. Request a quote for pricing on the equipment you have in mind, or contact us with any question about sizing, installation, or service.
Request a QuoteContact UsFind a Dealer