Opens in a new tab

M250H13L

6 Cylinder 4 Stroke Diesel
M250H13L is a 250 kW marine diesel generator with seawater aftercooling, J1939 data access, monitored fuel filtration, and automatic priming.
Request a QuoteContact Us
M250H13L · Features & Benefits

Simply
Engineered

For Your Vessel.

M250H13L is built for vessels with high auxiliary-power demand and a need for strong service visibility. Its 250 kW package combines a heavy-duty six-cylinder engine, seawater aftercooling, monitored fuel filtration, automatic priming, J1939 data access, and serviceable heat-exchanger cooling for demanding marine installations.

Seawater Aftercooler

Optimized high-output combustion
A seawater aftercooler reduces the temperature of compressed intake air after turbocharging, supporting optimized combustion and output at this generator's higher power level.

Electronic System Profiler

Integrated engine data access
The Electronic System Profiler supplies SAE J1939 engine data through a CAN bus connection, providing a direct path to compatible monitoring equipment.

Monitored Fuel Filtration

Earlier fuel-system warnings
Canister fuel filters include a drain plus sensors for low fuel pressure and water in the fuel, giving operators warning of conditions that can disrupt fuel delivery.

Automatic-Priming Fuel Pump

Simpler fuel-system recovery
An electric fuel transfer pump provides automatic priming, reducing manual steps when the fuel system must be restored after service.

Replaceable Wet Liners

Long-term engine serviceability
Replaceable wet cylinder liners keep major cylinder wear surfaces serviceable during overhaul, supporting long engine life while reducing the cost and scope of future rebuild work.

Additional Features & Benefits

Technical Specifications · M250H13L

AC Output
Specification 60 Hz 50 Hz
Rated Power (kW)250200
RPM18001500
Frequency (Hz)6050
Phase (PF) Standard3 Phase (0.8 PF)
Engine Data
Cylinders6
Cycle4
Displacement549 cu in9 L
Bore4.6 in118 mm
Stroke5 in127 mm
AspirationTurbocharged, Aftercooled
Oil Capacity (with filter)33.2 qt31 L
Cooling System
Specification 60 Hz 50 Hz
Heat Rejection (BTU/min)15289—
FW Pump Capacity (GPM)FW Pump Capacity (LPM)78297—
SW Pump Capacity (GPM)SW Pump Capacity (LPM)79295—
HE Cooling Capacity10 gal38 L
Min Through-Hull Diameter2.5 in63.5 mm
SW Inlet Hose ID2.5 in63.5 mm
Max SW Suction Head9.8 in3 m
Fuel System
Specification 60 Hz 50 Hz
Fuel Rate - Full Load (GPH)18.8—
Min Fuel Suction Line3/8 in10 mm
Max Pump Suction Lift95 in2408 mm
Air & Exhaust
Specification 60 Hz 50 Hz
Air Consumption (CFM)Air Consumption (m³/min)83023.5—
Exhaust Gas Volume (CFM)Exhaust Gas Volume (m³/min)181251.3—
Max Exhaust Back Pressure30 in H₂O762 mm H₂O
Wet Exhaust Elbow OD4 in102 mm
Exhaust Gas Temperature756°F402°C
Heat Radiated (BTU/min)1018
Dimensions & Weight
Length106 in2692 mm
Width42 in1067 mm
Height49.5 in1258 mm
Dry Weight5740 lbs2604 kg
DC Electrical
Standard Voltage24V
Min Battery Capacity (Ah)750
Starter Current (12V)300 A
Battery Cable Size2/0
M250H13L · Document Library

Documents

3 DOCUMENTS · 3 TYPES

Spec Sheets · 1 File

M250H13L Specification Sheet
S128

Manuals · 1 File

Generator Set Installation Manual
IM1000

Drawings · 1 File

M250H13 Installation Drawing
D-5236
Talk to Us

Get a Quote or Ask a Question

Tell us about your vessel or project. Request a quote for pricing on the equipment you have in mind, or contact us with any question about sizing, installation, or service.
Request a QuoteContact UsFind a Dealer