Seawater Aftercooler
Optimized high-output combustion
A seawater aftercooler reduces the temperature of compressed intake air after turbocharging, supporting optimized combustion and output at this generator's higher power level.
M250H13L is built for vessels with high auxiliary-power demand and a need for strong service visibility. Its 250 kW package combines a heavy-duty six-cylinder engine, seawater aftercooling, monitored fuel filtration, automatic priming, J1939 data access, and serviceable heat-exchanger cooling for demanding marine installations.
| Specification | 60 Hz | 50 Hz |
|---|---|---|
| Rated Power (kW) | 250 | 200 |
| RPM | 1800 | 1500 |
| Frequency (Hz) | 60 | 50 |
| Phase (PF) Standard | 3 Phase (0.8 PF) | |
| Cylinders | 6 | |
| Cycle | 4 | |
| Displacement | 549 cu in9 L | |
| Bore | 4.6 in118 mm | |
| Stroke | 5 in127 mm | |
| Aspiration | Turbocharged, Aftercooled | |
| Oil Capacity (with filter) | 33.2 qt31 L | |
| Specification | 60 Hz | 50 Hz |
|---|---|---|
| Air Consumption (CFM)Air Consumption (m³/min) | 83023.5 | — |
| Exhaust Gas Volume (CFM)Exhaust Gas Volume (m³/min) | 181251.3 | — |
| Max Exhaust Back Pressure | 30 in H₂O762 mm H₂O | |
| Wet Exhaust Elbow OD | 4 in102 mm | |
| Exhaust Gas Temperature | 756°F402°C | |
| Heat Radiated (BTU/min) | 1018 | |
| Length | 106 in2692 mm | |
| Width | 42 in1067 mm | |
| Height | 49.5 in1258 mm | |
| Dry Weight | 5740 lbs2604 kg | |
| Standard Voltage | 24V | |
| Min Battery Capacity (Ah) | 750 | |
| Starter Current (12V) | 300 A | |
| Battery Cable Size | 2/0 | |